Xtreme Polishing Systems | Surface Preparation Machines Equipment, Concrete & Epoxy Supply > NEW ITEMS >

Tramex CME4 Moisture Meter
Tramex CME4 Encounter Meter | Xtreme Polishing Systems

Alternative Views:

Our Price: $450.00

Product Code: CME4

Description Data Sheets
The Tramex CME 4 Concrete Moisture Encounter Meter allows you to easily check the moisture content of concrete floors during the drying out period. Excess moisture in the concrete could cause latent problems such as condensation or failure of the adhesive under the floor covering. This meter is an instant and non-invasive handheld electronic instrument used for testing moisture conditions in concrete slabs and giving comparative readings in other cementitious floor screeds. Precise and easy to use, the CME4 allows the user to make multiple tests over a large area in the shortest possible time. Concrete floors must be dry before a floor can be relished. Do not take the risk with excess moisture and test before floor installation.
Technical Data
  • Detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance.
  • A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument.
  • Determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear analog dial.
  • No need to probe, drill or mechanically damage the surface
  • Instant and precise readings to a depth of approx. ¾" into the slab.
  • Spring-loaded contact pins compensate for uneven concrete and boost signal penetration.
  • Hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.

Please call (877) 958-5264 for more information regarding this product.

Share your knowledge of this product. Be the first to write a review »