Xtreme Polishing Systems | Surface Preparation Machines Equipment, Concrete & Epoxy Supply > Overlays/Micro-Toppings >

Rapid Set Flow Control Additive
Rapid Set Flow Control Additive | Xtreme Polishing Systems


 
Our Price: $3.00

Availability: Usually Ships in 24 Hours
Product Code: RSFC-212
Qty:

Description Data Sheets Specifications
 

For projects requiring increased mix flow, FLOW Control is your answer. Use with Rapid Set cement products and most other packaged hydraulic cements, FLOW Control works in two ways. First, adding FLOW to your mix significantly increases the fluidity of your mixture. Second, FLOW increases the strength and reduces the shrinkage of your mixture when using FLOW as a replacement for mixing water. With FLOW, the same working consistency (or slump) may be produced with approximately 20 to 40 percent less mixing water.

Rapid Set Flow Control Additive is a flow enhancing additive that allows higher fluidity or lower water requirement. Reducing water content by adding Flow Control will increase the final strength and durability.

This product performs two functions: First, adding Flow to your mix will significantly increase the fluidity of the mixture. Second, Flow increases the strength and reduces the shrinkage of your mixture when you use as a replacement for mixing water. The same working consistency (or slump) may be produced with approximately 20% to 40% less mixing water.


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 this is a good article. November 18, 2019
Reviewer: shairaj from N/A  
is it needed to use flow control additive in concrete material?

Was this review helpful to you?


Browse for more products in the same category as this item:

Overlays/Micro-Toppings
BY BRAND > Metzger/McGuire
BY BRAND > CTS Cement/Rapid Set