Xtreme Polishing Systems | Surface Preparation Machines Equipment, Concrete & Epoxy Supply > BY BRAND > Metzger/McGuire

Metzger/McGuire

offers a vast range of epoxy and polyurea products designed to provide an interruption free concrete floor surface. From filling joints to repairing cracks and surface defects to grouting polished concrete floors, Metzger/McGuire has a product that will suit your unique needs.

Sort By:
1
Rapid Set Flow Control Additive | Xtreme Polishing Systems Rapid Set Flow Control Additive

For projects requiring increased mix flow, FLOW Control is your answer. Use with Rapid Set cement products and most other packaged hydraulic cements, FLOW Control works in two ways. First, adding FLOW to your mix significantly increases the fluidity of your mixture. Second, FLOW increases the strength and reduces the shrinkage of your mixture when using FLOW as a replacement for mixing water. With FLOW, the same working consistency (or slump) may be produced with approximately 20 to 40 percent less mixing water.

Rapid Set Flow Control Additive is a flow enhancing additive that allows higher fluidity or lower water requirement. Reducing water content by adding Flow Control will increase the final strength and durability.

This product performs two functions: First, adding Flow to your mix will significantly increase the fluidity of the mixture. Second, Flow increases the strength and reduces the shrinkage of your mixture when you use as a replacement for mixing water. The same working consistency (or slump) may be produced with approximately 20% to 40% less mixing water.

Our Price: $3.00

(1)
Rapid Set Concrete Mix Fast Setting Concrete Repair | Xtreme Polishing Systems Rapid Set Concrete Mix

Rapid Set Concrete Mix is a multi-purpose, fast setting, repair cement mix that is ideal for concrete and structural repair, concrete restoration and concrete molding purposes. Rapid Set Concrete Mix is a rapidly hardening, high performance blend of Rapid Set hydraulic cement and quality aggregates with no added chlorides. This product produces a non-metallic finish that is extremely durable, even in wet environments, and is similar in appearance to portland cement concrete and may be applied using similar methods. Color can only be changed by adding concrete overlay dye, which is specifically formulated for cement overlays such as Rapid Set Concrete Mix.

Color Additives

Our Price: $14.25
Rapid Set LevelFlor Quick Setting, Self-Leveling | Xtreme Polishing Systems Rapid Set LevelFlor

Rapid Set LevelFlor is an advanced hydraulic cement based, self-leveling underlayment (SLU) that can be used both indoors and outdoors, and can also be used in wet and dry environments. LevelFlor offers a quick and economical repair solution for adhesion and leveling purposes. LevelFlor is specifically designed to rapidly level and and create a highly bonded strength to the floor's surface. LevelFlor maintains 30 minutes of workable time. LEED product evaluations summarize a products ability to contribute to a variety of LEED credits. These credits include Solar Reflectivity (SS7), Regional Materials (MR4), Recycled Content (MR5), VOC Content (EQ4) and Innovation in Design (ID1).

Applications: TRU PC spiked roller

Our Price: $24.00
Spal-Pro RS 88 Polyurea Joint Filler Metzger/ McGuire | Xtreme Polishing Systems Metzger/ McGuire Spal-Pro RS 88 Polyurea Joint Filler

Concrete Floor Joint Fillers for High Traffic Areas
Spal-Pro RS 88 Polyurea Joint Filler is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial, retail or commercial concrete floors.

  • Fill and protect joints in trafficked industrial and retail concrete floors.
  • Support traffic and protect joint edges.
  • Intended for use where final temperatures are from 32˚F (0˚C) to +120˚F (49˚C).
  • Filling cracks in industrial floors.

Our Price: $51.25
Spal-Pro RS 65 Semi-Rigid Polyurea Joint Filler by Metzger/McGuire | Xtreme Polishing Systems (877) 958-5264 Spal-Pro RS 65 Semi-Rigid Joint Filler by Metzger/ McGuire

Spal-Pro RS 65 Semi-Rigid Polyurea Joint Sealant is a durable product that seals retail and commercial concrete floors. A rapid set, two-component polyurea polymer liquid of 100% solids content.

Our Price: $51.25
Rapid Refloor Joint Filler | Xtreme Polishing Systems (877) 958-5264 Rapid Refloor

Rapid Refloor is a fast set, low viscosity, structural concrete repair product. A two component product to repair cracks and surface spalls/popouts or other surface defects. Ready for traffic in 15 - 30 minutes.

Our Price: $55.00
Metzger McGuire MM-80 Semi-Rigid Epoxy Joint Filler Industrial Joint Fillers and Sealants | Xtreme Polishing Systems Metzger McGuire MM-80 Semi-Rigid Epoxy Joint Filler (1 Gallon)

Metzger McGuire MM-80 is a two-component, 100% solids content epoxy joint filler designed to fill, protect, and repair joints and cracks in industrial concrete floors that are subject to hard, heavy wheeled traffic from carts, forklifts, and other vehicles handling heavy loads. Designed for use in areas where final temperatures are from 40˚F (10˚C) to +120˚F(49˚C).



When cured, MM-80 is a gray, semi-rigid (hard but slightly resilient) filler with a Shore hardness of A90-95. It yields sufficient rigidity to support loads crossing joints, protecting edges from spalling. It also offers sufficient resiliency to prevent brittleness throughout the floor’s life.



MM-80 exhibits low range tensile and adhesive strengths, which are characteristics necessary to allow the joints to open as the concrete shrinkage progresses.



MM-80 is the joint filler upon which ACI and PCA standards are based.

Our Price: $61.75
Metzger McGuire SRG Surface Refinement Grout | Rapid-Set Surface Restoration Polymer | Xtreme Polishing Systems Metzger McGuire SRG Surface Refinement Grout (2 Gallon Kit)

SRG (Surface Refinement Grout) is a two-component, 95% solids structural polyurethane/polyurea hybrid. When cured, this rigid structural polymer will fill/repair concrete floor surface imperfections, such as air holes, pop-outs, surface pitting, scratches, gouges, etc. SRG is available in several colors, making it easy to find the shade to camouflage floor surface pitting and surface imperfections. Choose this Low-Odor, Rapid-Setting Rigid Structural Polymer for Smoother, Denser Repairs!

SRG has a low-viscosity formula that allows it to penetrate deep into very small surface pits and imperfections, resulting in a smoother, denser floor surface. This minimal odor, rapid-set formula allows for quick access to floor areas for traffic or grinding as early as 1 hour after application (at 70°F). SRG is designed for use in commercial or retail polished concrete floors where final building temperatures are 32°F (0°C) to +120°F (49°C).

Our Price: $130.00
MM-80P Semi-Rigid Epoxy Joint Filler | Xtreme Polishing Systems (877) 958-5264 MM-80P Semi-Rigid Epoxy Joint Filler

The MM-80P Semi-Rigid Epoxy Joint Filler for Class 6-9 Industrial Concrete Floors. A two-component, 100% solids content epoxy joint filler. Developed to fill & protect joints in industrial concrete floors that are subject to hard wheel/heavy load traffic. An industry standard epoxy and polyurea joint filler and repair product.

Our Price: $617.50
Metzger McGuire MM-80 Semi-Rigid Epoxy Joint Filler Industrial Joint Fillers and Sealants | Xtreme Polishing Systems (877) 958-5264 Metzger McGuire MM-80 Semi-Rigid Epoxy Joint Filler (10 Gallon)

Metzger McGuire MM-80 is a two-component, 100% solids content epoxy joint filler designed to fill, protect, and repair joints and cracks in industrial concrete floors that are subject to hard, heavy wheeled traffic from carts, forklifts, and other vehicles handling heavy loads. Designed for use in areas where final temperatures are from 40˚F (10˚C) to +120˚F(49˚C).



When cured, MM-80 is a gray, semi-rigid (hard but slightly resilient) filler with a Shore hardness of A90-95. It yields sufficient rigidity to support loads crossing joints, protecting edges from spalling. It also offers sufficient resiliency to prevent brittleness throughout the floor’s life.



MM-80 exhibits low range tensile and adhesive strengths, which are characteristics necessary to allow the joints to open as the concrete shrinkage progresses.



MM-80 is the joint filler upon which ACI and PCA standards are based.

Our Price: $617.50
Metzger McGuire SRG Surface Refinement Grout | Rapid-Set Surface Restoration Polymer | Xtreme Polishing Systems Metzger McGuire SRG Surface Refinement Grout (10 Gallon Kit)

MM SRG (Surface Refinement Grout) is a two-component, 95% solids structural polyurethane/polyurea hybrid. When cured, this rigid structural polymer will fill/repair concrete floor surface imperfections, such as air holes, pop-outs, surface pitting, scratches, gouges, etc. SRG is available in several colors, making it easy to find the shade to camouflage floor surface pitting and surface imperfections. Choose this Low-Odor, Rapid-Setting Rigid Structural Polymer for Smoother, Denser Repairs.

MM SRG has a low-viscosity formula that allows it to penetrate deep into very small surface pits and imperfections, resulting in a smoother, denser floor surface. This minimal odor, rapid-set formula allows for quick access to floor areas for traffic or grinding as early as 1 hour after application (at 70°F). SRG is designed for use in commercial or retail polished concrete floors where final building temperatures are 32°F (0°C) to +120°F (49°C).

Our Price: $640.00
   
 
1