Concrete Flooring > DECORATIVE CONCRETE > Epoxy Floor Coatings >

DRYTEK Moisture Vapor Barrier (6 Gallons)
DRYTEK Moisture Vapor Barrier | HP Spartacote | (877) 958-5264


 
Our Price: $834.90
Hazmat Freight $50.00

Product Code: HP-4151-0055-2
Qty:

Description Data Sheets Specifications
 
DRYTEK Moisture Vapor Barrier is a single-coat, 100% solids, liquid applied, 2-part epoxy coating specifically designed for controlling the moisture vapor emission rate from new or existing concrete slabs prior to installing DRYTEK self-leveling underlayment and decorative toppings.

Concrete surface preparation is the most important factor to a successful DRYTEK self-leveling underlayment (SLU), moisture vapor barrier, or decorative wear surface installation. While it is not possible to cover all of the conditions that may exist on every project, this guide will cover substrate and primer application for some of the more common conditions found on most concrete projects.

6 Gallon Kit DRYTEK Moisture Vapor Barrier Color Chart
Technical Data
Coverage: To be applied at minimum thickness of 12 mils. DRYTEK Moisture Vapor Barrier when applied at a minimum 12 mils thickness exceeds ASTM F3010 and will control moisture vapor emission rate up to 25 lbs./1,000 ft2 /24 hr (1415 μg/(s • m))^ per ASTM F1869/ maximum^ RH conditions per ASTM F2170. In order to help insure coverage, periodically check mil thickness using a DRYTEK Moisture Vapor Barrier Wet Film Thickness Gauge.

Share your knowledge of this product. Be the first to write a review »