Rapid Set® TXP™ Epoxy Primer: Two Component, Moisture and Alkali Insensitive Epoxy Primer
Rapid Set TXP (TRU Epoxy Primer) is a high performance, two-component, low VOC, moisture and alkali insensitive interior/exterior epoxy primer designed for use with the Rapid Set TRU Self Leveling finished flooring applications. TXP is recommended for most wear topping and decorative system installations. When applied at 12 mils (0.3mm) thickness, the adhesion of TXP and TRU Self Leveling will remain unaffected by Moisture Vapor Transmission (MVT) and alkalinity up to pH of 14. Always comply with subsequent manufacturer's testing and installation requirements when their products are used in conjunction with TRU® Self Leveling as part of an installed floor system.
COVERAGE & PACKAGING TXP is available in 3-gallon kits. Coverage is 400 sq. ft. (37 sq. m) @ 12 mils (0.3mm) thickness. Coverage rates are approximate and may vary due to the porosity and surface profile of the concrete substrate.
OTHER SUBSTRATES TXP can be used on properly prepared epoxy coatings, steel, ceramic tile, quarry tile and Terrazzo. Consult CTS CEMENT Technical Department for installation requirements.