Xtreme Polishing Systems | Surface Preparation Machines Equipment, Concrete & Epoxy Supply > BY BRAND > Easycove

Easycove

patented cove system is truly one of a kind! In the course of countless hours, designs and improvements, we are proud to offer you the most effective cove on the market. Longevity and durability are our standard and our commercial cove system, paired with our custom formulated adhesive creates a bond so strong that when applied to a concrete surface, takes over 300 lbs of pulling force to remove a section less than 2 feet long off of a wall.

Sort By:
1
Easycove Corner Cove | Xtreme Polishing Systems (877) 958-5264 Easycove Corner Cove

Easycove® coving can be mitered to any angle, and with the added feature of our DoveLock™ interlocking bond channels, can accommodate any inside or outside angle.  However, demand in this industry continues to express an interest in pre-formed corners, and Easycove® has responded with our newly developed cove corners. Each preformed cove base corner replicates the unique DoveLock™ engineering, and further encourages saving time, reductions in materials and labor costs, and continued ease of typical coving installations. Available in 4" and 6" Unit pricing based on per piece.

Our Price: $9.00
Easycove Wall Cove | Xtreme Polishing Systems (877) 958-5264 Easycove Wall Cove

Thousands of linear feet of Easycove® coving can be installed in a fraction of the time of traditional trowel down or other precast cove bases. In addition, the one-of-a-kind “no caulk” lip bevel eliminates the need to finish caulk. Just adhere to the wall with our recommended adhesive and coat. Easycove® coving can be mitered to any angle, and with the added feature of our DoveLock interlocking bond channels, can accommodate any inside or outside angle. Easycove‘s understanding of cove base in the resinous flooring industry, as well as its consumer’s sense of direction, has proved useful for meeting the demands for quality cove based products in the resinous flooring industry.

Easycove® pre-formed cove base corner replicates the unique DoveLock engineering, and further encourages saving time, reductions in materials and labor costs, and continued ease of typical coving installations. pre-formed cove base corner replicates the unique DoveLock engineering, and further encourages saving time, reductions in materials and labor costs, and continued ease of typical coving installations. However, demand in this industry continues to express an interest in pre-formed corners, and Easycove® has responded with our newly developed cove corners. Available in 1", 4" and 6" *Unit pricing based on per piece at 4 feet long.

Our Price: $9.64
Easycove Joint & Seal Epoxy Adhesive | Xtreme Polishing Systems (877) 958-5264 Easycove Joint & Seal

By placing a thin line of the Easycove Joint & Seal Adhesive to the edge of the coving, and pressing together the cove base, you will create a completely monolithic cove that is properly aligned. This product is key to keeping the cove in perfect alignment from top to bottom. Also used to tack-up areas of cove installation to hold the top of the cove to the wall, allowing time for the adhesive to set up. This feature product eliminates the need for taping or tack nailing and further ensures ease of installation. This is a single component low viscosity cyanoacrylate adhesive. It is a fast setting wicking grade adhesive ideal for bonding pre assembled parts.

Our Price: $11.10
Easycove Twin Tube Epoxy Adhesive | Xtreme Polishing Systems (877) 958-5264 Easycove Twin Tube Adhesive

Easycove Twin Tube Adhesive is a clear, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial, retail or commercial concrete floors.

Our Price: $44.00
   
 
1