Xtreme Polishing Systems | Surface Preparation Machines Equipment, Concrete & Epoxy Supply > Shop Products > By Brand > Ameripolish®

Ameripolish®

Ameripolish® manufactures high performance architectural concrete products through extensive research and field testing. Founded in 2005, Ameripolish® revolutionized the concrete polishing industry by introducing solvent-based and concrete penetrating dyes. Since then, with the acquisition of leading figures in the industry, the Ameripolish® product development team has unfolded, on an annual basis, new and exciting, cutting edge technology to prep, strengthen, color, protect and maintain polished concrete floors.

Sort By:
1
Ameripolish® OS Integral Color Concrete Overlay Dye | Xtreme Polishing Systems Ameripolish® OS Integral Color (1 Bag)

Ameripolish® OS Integral Color

Ameripolish® OS Integral Color is a concentrated liquid dispersion of mineral oxide pigment particles formulated to color concrete and is available in a broad range of hues. OS Integral Color meets ASTM C979, Standard Specification for Pigments for Integrally Colored Concrete, and is approved by the manufacturer of Rapid Set® TRU™, a leading cementitious self-leveling polishable overlay.

Features & Benefits:

  • Does not alter mix properties.
  • Maintains original strength.
  • Colorfast in outdoor settings.
  • Meets ASTM C979 standard.
  • Premeasured units equal standard dose for one 50 pound bag of Rapid Set® TRU® or other overlay products.

Our Price: $8.80
1 gal. Ameripolish® PSE Paver Sealer Enhancer | Xtreme Polishing Systems 1 gal. Ameripolish® PSE Paver Sealer Enhancer

Ameripolish® PSE Paver Sealer Enhancer

Ameripolish® PSE Paver Sealer Enhancer is a water-based, high-performance polymer that forms a breathable barrier that protects cementitious materials from salts, stains, dirt, oils, and moisture. It has been formulated to rejuvenate and enhance the original color of pavers and concrete replications while providing long-lasting weather protection against water penetration and UV degradation.

Features & Benefits:
  • Coverage: 1 gal. covers 300 - 600 sq ft.
  • The breathable barrier prevents staining and seals out moisture.
  • Protects color from UV degradation.
  • The non-yellowing finish will not peel, crack, blister, or blush.
  • Environmentally safe, low VOCs.

Our Price: $30.50
1 gal. Ameripolish® X-Link WB Surface Sealer & Protector | Xtreme Polishing Systems 1 gal. Ameripolish® X-Link WB Surface Sealer

Ameripolish® X-Link WB Surface Sealer

Ameripolish® X-Link WB Surface Sealer is a stain protector for exterior and interior concrete. This fast-drying water-based sealer was designed for use with Ameripolish® ColorJuice E but may also be used on uncolored concrete or with other compatible color products. It is ideal for any concrete or cementitious surface, as well as porous brick, natural and manufactured stone, stucco, slate, unglazed tile, and flagstone.

Features & Benefits:
  • Ready to use (RTU).
  • Non-yellowing finishes. Breathable and fast-drying.
  • Oil and chemical resistant.
  • Added mildew and UV protection.
  • Ideal for indoor or outdoor applications.
  • Coverage: approximately 300 - 500 sq ft. per gallon.

Our Price: $31.80
30 oz. Ameripolish® Penetrating Agent | Xtreme Polishing Systems 30 oz. Ameripolish® Penetrating Agent

Penetrating Agent for Concrete Stains, Dyes, & Colorants

Ameripolish® Penetrating Agent improves dye penetration by delaying the acetone flash from 7-8 seconds to over 30 seconds. This allows dyes more time to penetrate deeper into the surface, which is especially advantageous for extremely hard or dense concrete. Penetrating Agent also gives you more time for performing additional decorative applications.

Ameripolish® Penetrating Agent minimizes surface residue, reduces material waste, and comes in a convenient, easy-to-use container, ensuring accurate mixing on every job. Just add 4 ounces to a pre-mixed gallon of dye, and you're ready to go. Penetrating Agent is designed for use with any Ameripolish solvent-based dye.

Features & Benefits:
  • Clearance Item: Limited quantities available.
  • Improves dye penetration.
  • Ideal for use on very dense or hard concrete where the normal dye options will not penetrate.
  • Dilute 1 to 4 ounces per gallon of color solution.

Our Price: $35.00
1 gal. Ameripolish® ColorSolve | Xtreme Polishing Systems 1 gal. Ameripolish® ColorSolve

Solvent Carrier for Ameripolish® Dyes

Ameripolish® ColorSolve is a solvent carrier designed and recommended for use with Ameripolish® Classic and SureLock™ concrete dyes. ColorSolve is extremely easy to use and leaves little to no residual dye on the surface. Use of ColorSolve extends the dye coverage rate, increasing it up to 1,000 square feet per gallon!

Ameripolish® ColorSolve should be applied by using an appropriate solvent sprayer with or without a microfiber mop. Due to the lower evaporation rate of ColorSolve, using an Ameripolish® microfiber mop reduces labor costs, saves time, and extends the square footage of your dye.

Use of ColorSolve does not require taping and masking areas in preparation for the dye treatment. Another unique feature of ColorSolve is that it allows concrete dyes to be applied at higher grit levels such as at 800 and 1,500 grit for color enhancement or reapplication and refurbishing.

Features & Benefits:
  • Leaves no or very little residual dye on surface saving time on cleaning and dye expense.
  • Doubles the coverage rate of concrete dyes.
  • Lower evaporation rate allows the use of an Ameripolish® microfiber mop, saving time on taping and masking.
  • Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing.

Our Price: $39.80
1 gal. Ameripolish® Strip & Clean | Xtreme Polishing Systems (877) 958-5264 1 gal. Ameripolish® Strip & Clean

Water-Based Stripping Agent

Ameripolish® Strip & Clean is a water-based stripping agent specifically formulated for the grind-free removal of the Ameripolish 3D SP sealer from polished concrete floors. Strip & Clean also is a great tool to prepare exterior concrete for ColorJuice applications. It helps remove mold, mildew, and other contaminants that would otherwise impair the project.

Features & Benefits:
  • Grind free sealer removal
  • Formulated specifically to remove 3D SP and other guard type products
  • Safely remove improperly installed “guard” type products
  • Ideal for preparation prior to any dye application

Our Price: $40.00
Hazmat $50.00
Ameripolish® OS Integral Color (5 Bags) | Xtreme Polishing Systems Ameripolish® OS Integral Color (5 Bags)

Ameripolish® OS Integral Color

Ameripolish® OS Integral Color is a concentrated liquid dispersion of mineral oxide pigment particles formulated to color concrete and is available in a broad range of hues. OS Integral Color meets ASTM C979, Standard Specification for Pigments for Integrally Colored Concrete, and is approved by the manufacturer of Rapid Set® TRU™, a leading cementitious self-leveling polishable overlay.

Features & Benefits:

  • Does not alter mix properties.
  • Maintains original strength.
  • Colorfast in outdoor settings.
  • Meets ASTM C979 standard.
  • Premeasured units equal standard dose for one 50 pound bag of Rapid Set® TRU® or other overlay products.

Our Price: $43.80
1 gal. Ameripolish® Solvent-Based Classic Concrete Dye | Xtreme Polishing Systems 1 gal. Ameripolish® Classic Concrete Dye

Chemically Bonding Dyes for Polished Concrete

Ameripolish® Classic Dyes were originally designed specifically for polished and exposed concrete, the Ameripolish® Classic Dyes penetrate into the surface of the concrete slab for extremely long-lasting color that will not wear from daily usage. Classic Dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardeners, acid stains, or even layered to create a truly unique, mottled effect.

Features & Benefits:
  • Solvent-based mixes with Ameripolish® ColorSolve and is VOC compliant.
  • Colors penetrate the surface and never wear off.
  • Will not grind off during resin-grinding stages of polished concrete.
  • Coordinate with Ameripolish® Edge Tint for a seamless wall-to-wall floor solution.
  • For indoor use only.
  • Coverage is approximately 400 - 700 sq ft. per gallon.

Our Price: $55.00
1 gal. Ameripolish® SureLock Concrete Dye | Xtreme Polishing Systems 1 gal. Ameripolish® SureLock Concrete Dye

Chemically Bonding Dyes for Polished Concrete

Ameripolish® SureLock Dye formula has recently been updated making them the most vibrant concrete dyes Ameripolish® has ever produced. SureLock Dyes are versatile colorants for polished concrete that mix with water or Ameripolish® ColorSolve™. SureLock Dyes are to be applied just before densifying with 3D HS or HSL, helping the color penetrate and chemically bond to the concrete.

Ameripolish® SureLock Dye is a pre-dissolved concentrate liquid that is fast and easy to use. The formula includes UV stabilizers to resist fading as well as a penetrating agent to eliminate further mixing and develop deep, rich colors even on hard, dense concrete.

Features & Benefits:
  • Mixes with water or Ameripolish® ColorSolve™ and is VOC compliant.
  • Consistent, rich penetrating color with UV stabilizers resist fading.
  • Optionally can be used with 3D line densifiers to chemically bond to the concrete.
  • Liquid concentrate eliminates 3-hour wait to dissolve dye required by other products.
  • For indoor use only.
  • Coverage is approximately 400 - 700 sq ft. per gallon.

Our Price: $55.00
1 gal. Ameripolish® 3D SP Stain Protector | Xtreme Polishing Systems 1 gal. Ameripolish® 3D SP Stain Protector

Stain Protector

Ameripolish® 3D SP is a breathable semi-penetrating/semi-tropical sealer that helps to protect surfaces against stains and etching. 3D SP creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion.

Features & Benefits:
  • Ready to use (RTU).
  • UV stabilizers help protect against fading.
  • Creates a water-resistant barrier to prevent staining, etching, and protect color.
  • 3D SP is a color enhancer for polish concrete floors with dye.
  • Contains 3D densifier properties to aid in hardening and dust-proofing.
  • Coverage is approximately 2,000 - 2,500 sq ft. per gallon.

Our Price: $60.00
1 gal. Ameripolish® ColorJuice Exterior Concrete Dye | Xtreme Polishing Systems 1 gal. Ameripolish® ColorJuice Exterior Concrete Dye

Ameripolish® ColorJuice Exterior Concrete Dye

Ameripolish® ColorJuice E concrete colorant is an improved formula of the old ColorJuice 3D and has an identical application process. This dye is a fast, easy way to apply color to some types of interior and many types of exterior concrete and provides durable, rich hues by bonding color pigment directly into the concrete.

Ameripolish® ColorJuice E is ideal for porous concrete finishes such as broom-finished or stamped concrete including pavements, porches, patios, driveways, sidewalks, and pool decks. ColorJuice E can also be used for interior concrete (at the appropriate grit stages) such as garage floors and can be applied to other cementitious surfaces.

Features & Benefits:
  • Low VOC.
  • Ideal for indoor or outdoor use.
  • Fast, easy application.
  • Water-based and UV stable.
  • Coverage rate: approx. 400 - 800 sq ft. per gallon.
  • Excellent performance when used with Ameripolish® X-Link WB Surface Sealer

Our Price: $70.00
1 gal. Ameripolish Oil Ingester Water-Based Microbial Stain Remover by Xtreme Polishing Systems 1 gal. Ameripolish® Oil Ingester

Water-Based Microbial Stain Remover

Ameripolish® Oil Ingester is an enzyme-based product that consumes and breaks down oil-based materials and absorbs odors from the surface of the concrete without causing damage or affecting any existing colorant, sealer, or stain protector. The biodegradable product is environmentally safe and can be left on surfaces for several days if needed to deeply penetrate seeped stains.

Features & Benefits:
  • Safely removes oil stains from most surfaces.
  • Stops oil from continually wicking to the surface
  • Does not damage colorants, sealers, or stain protectors
  • Works best above 55ºF and with regular applications

Our Price: $82.50

(1)
5 gal. Ameripolish® 3D HSL Concrete Densifier | Xtreme Polishing Systems 5 gal. Ameripolish® 3D HSL Concrete Densifier

Low Solids Hybrid Silicate Densifier

Ameripolish® 3D HSL (3 densifiers in one product) Hybrid Silicate Densifier is formulated with 3 different size molecule silicates to penetrate even the most difficult, tight floor cap. 3D HSL strengthens and densifies from within the concrete by providing strength at multiple levels of the slab. 3D HSL improves surface performance and resists the harmful effects of traffic wear and weathering by improving the abrasion resistance for new or aged concrete. 3D HSL is ideal for use for exposed and polished concrete, as well as integrally colored cement.

Features & Benefits:
  • Hardens deep within the slab to improve durability even after grinding.
  • Contains UV stabilizers
  • to help protect color from fading.
  • Ideal for new construction, existing concrete, and diamond pad burnishing.
  • Enhances polished color, gloss, and clarity.
  • Provides superior stain resistance especially when combined with SR2 Sealer.
  • Coverage is approximately 600 - 800 sq ft. per gallon.

Our Price: $100.00
5 gal. ​Ameripolish® AquaShield Water Repellent | Xtreme Polishing Systems 5 gal. ​Ameripolish® AquaShield Water Repellent

Waterproofing Treatment for Concrete & Masonry

Ameripolish® AquaShield waterproofing treatment is a long-lasting treatment that provides water repellency to any concrete surface, helping to prevent staining and water damage. AquaShield coverage varies depending on the porosity of the concrete. Expect approximately 400FT2 per gallon on a broom finish and approximately 2,000 on less porous finishes.

Features & Benefits:
  • Extremely long-lasting.
  • Water-based and fast drying.
  • Low VOC and non-flammable.
  • Ideal for use on any concrete or masonry surface indoor or outdoor.

Our Price: $120.00
1 gal. Ameripolish® Edge Tint | Xtreme Polishing Systems 1 gal. Ameripolish® Edge Tint

Colorant For Edges And Borders

Ameripolish® Edge Tint provides wall-to-wall color options for border striping and edging areas that are difficult to grind and polish. Ameripolish® Edge Tint is a mixture of the proprietary non-yellowing acrylic blend (Part A) and the Ameripolish® Dye coloring pack (Part B) available in coordinating Classic colors to eliminate edge work and complement any floor design.

Features & Benefits:
  • Available in 22 Ameripolish® Classic coordinating colors.
  • Creates uniform edges and borders to eliminate edge work.
  • Resists most oil, grease, and food stains.
  • Coverage is approximately 800-1,000 linear feet, 4 inches wide with 2 coats.

Our Price: $124.00
Ameripolish® PG-7K Polishable Grout Coating System | Xtreme Polishing Systems ​​Ameripolish® PG-7K Polishable Grout Coating System

Polishable Grout Coating System

Ameripolish® PG-7K is a fast-setting, modified polymer, high-strength cement with outstanding bonding properties & characteristics formulated specifically to fill in small cracks, pinholes, and surface irregularities in concrete floors. It also increases durability, gloss, and distinctness of image (DOI) on most floors. PG-7K readily accepts Ameripolish® concrete dyes and requires no special polishing procedures. Ameripolish® PG-7K Part A - Powder must be mixed with PG-&K Part B - Liquid.

Features & Benefits:
  • Simple 2:1 mix ratio.
  • Increases durability, gloss, and distinction of image (DOI) on most floors.
  • Cement-based formula blends in with concrete.
  • Low viscosity helps fill extremely small pinholes and irregularities.
  • Water cleanup prior to curing.
  • Can be wetly polished in 60-90 minutes without re-emulsifying.
  • Available in a 5 gallon kit.

Our Price: $144.00
1 gal. ​Ameripolish® SR² Concrete Sealer & Stain Resistor | Xtreme Polishing Systems 1 gal. ​Ameripolish® SR² Concrete Sealer

Fully Penetrating Stain Resistor

Ameripolish® SR² is a penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil and water-based stains. The water and oil repelling qualities of SR² provide superior stain protection on most substrates.

Ameripolish® SR² can be used as a standalone product, but to obtain optimum performance, Ameripolish® SR² is recommended for use with Ameripolish® 3D HS or HSL Densifiers.

Features & Benefits:

  • Non-topical penetrating sealer.
  • Treated surfaces 'breath' and do not trap moisture.
  • Excellent stain repellency for residential, commercial, and even industrial applications.
  • Extreme hydrophobic and oil phobic characteristics for maximum stain resistance.
  • Coverage is approximately 3,000 - 5,000 sq ft. per gallon.

Our Price: $150.00
5 gal. Ameripolish® PSE Paver Sealer Enhancer | Xtreme Polishing Systems 5 gal. Ameripolish® PSE Paver Sealer Enhancer

Ameripolish® PSE Paver Sealer Enhancer

Ameripolish® PSE Paver Sealer Enhancer is a water-based, high-performance polymer that forms a breathable barrier that protects cementitious materials from salts, stains, dirt, oils, and moisture. It has been formulated to rejuvenate and enhance the original color of pavers and concrete replications while providing long-lasting weather protection against water penetration and UV degradation.

Features & Benefits:
  • Coverage: 1 gal. covers 300 - 600 sq ft.
  • The breathable barrier prevents staining and seals out moisture.
  • Protects color from UV degradation.
  • The non-yellowing finish will not peel, crack, blister, or blush.
  • Environmentally safe, low VOCs.

Our Price: $152.50
5 gal. Ameripolish® ColorSolve | Xtreme Polishing Systems 5 gal. Ameripolish® ColorSolve

Solvent Carrier for Ameripolish® Dyes

Ameripolish® ColorSolve is a solvent carrier designed and recommended for use with Ameripolish® Classic and SureLock™ concrete dyes. ColorSolve is extremely easy to use and leaves little to no residual dye on the surface. Use of ColorSolve extends the dye coverage rate, increasing it up to 1,000 square feet per gallon!

Ameripolish® ColorSolve should be applied by using an appropriate solvent sprayer with or without a microfiber mop. Due to the lower evaporation rate of ColorSolve, using an Ameripolish® microfiber mop reduces labor costs, saves time, and extends the square footage of your dye.

Use of ColorSolve does not require taping and masking areas in preparation for the dye treatment. Another unique feature of ColorSolve is that it allows concrete dyes to be applied at higher grit levels such as at 800 and 1,500 grit for color enhancement or reapplication and refurbishing.

Features & Benefits:
  • Leaves no or very little residual dye on surface saving time on cleaning and dye expense.
  • Doubles the coverage rate of concrete dyes.
  • Lower evaporation rate allows the use of an Ameripolish® microfiber mop, saving time on taping and masking.
  • Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing.

Our Price: $157.80
5 gal. Ameripolish® X-Link WB Surface Sealer | Xtreme Polishing Systems 5 gal. Ameripolish® X-Link WB Surface Sealer

Ameripolish® X-Link WB Surface Sealer

Ameripolish® X-Link WB Surface Sealer is a stain protector for exterior and interior concrete. This fast-drying water-based sealer was designed for use with Ameripolish® ColorJuice E but may also be used on uncolored concrete or with other compatible color products. It is ideal for any concrete or cementitious surface, as well as porous brick, natural and manufactured stone, stucco, slate, unglazed tile, and flagstone.

Features & Benefits:
  • Ready to use (RTU).
  • Non-yellowing finishes. Breathable and fast-drying.
  • Oil and chemical resistant.
  • Added mildew and UV protection.
  • Ideal for indoor or outdoor applications.
  • Coverage: approximately 300 - 500 sq ft. per gallon.

Our Price: $159.00
5 gal. Ameripolish 3D HS Concrete Densifier | Xtreme Polishing Systems 5 gal. ​Ameripolish® 3D HS Concrete Densifier

Hybrid Silicate Densifier

Ameripolish® 3D HS (3 densifiers in one product) Hybrid Silicate Densifier improves surface performance and resists the harmful effects of traffic wear and weathering. By having 3 different size molecules silicates this product fully penetrates varying densities of concrete regardless of region or hardness. This improves the abrasion resistance for new or aged concrete. 3D HS is ideal for use for exposed and polished concrete, as well as cement with integral color.

Features & Benefits:
  • Ideal for new or existing concrete.
  • Hardens deep within the slab to improve durability even after grinding.
  • Contains UV stabilizers to help protect color from fading.
  • Enhances polished color, gloss, and clarity.
  • Contains stain-resistant chemicals to help prevent penetration of stains.
  • Minimizes dust for healthier indoor air quality.
  • Coverage is approximately 600 - 800 sq ft. per gallon.

Our Price: $200.00
Ameripolish® SureLock Concrete Dye Sample Kit  | Xtreme Polishing Systems Ameripolish® SureLock Concrete Dye (Sample Kit)

Chemically Bonding Dyes for Polished Concrete

Ameripolish® SureLock Dye formula has recently been updated making them the most vibrant concrete dyes Ameripolish® has ever produced. SureLock Dyes are versatile colorants for polished concrete that mix with water or Ameripolish® ColorSolve™. SureLock Dyes are to be applied just before densifying with 3D HS or HSL, helping the color penetrate and chemically bond to the concrete.
Ameripolish® SureLock Dye is a pre-dissolved concentrate liquid that is fast and easy to use. The formula includes UV stabilizers to resist fading as well as a penetrating agent to eliminate further mixing and develop deep, rich colors even on hard, dense concrete.

Features & Benefits:
  • Mixes with water or Ameripolish® ColorSolve™ and is VOC compliant.
  • Consistent, rich penetrating color with UV stabilizers resist fading.
  • Optionally can be used with 3D line densifiers to chemically bond to the concrete.
  • Liquid concentrate eliminates 3-hour wait to dissolve dye required by other products.
  • For indoor use only.
  • Coverage is approximately 400 - 700 sq ft. per gallon.

Our Price: $285.60
5 gal. Ameripolish® Solvent-Based Classic Concrete Dye | Xtreme Polishing Systems 5 gal. Ameripolish® Classic Concrete Dye

Chemically Bonding Dyes for Polished Concrete

Ameripolish® Classic Dyes were originally designed specifically for polished and exposed concrete, the Ameripolish® Classic Dyes penetrate into the surface of the concrete slab for extremely long-lasting color that will not wear from daily usage. Classic Dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardeners, acid stains, or even layered to create a truly unique, mottled effect.

Features & Benefits:
  • Solvent-based mixes with Ameripolish® ColorSolve and is VOC compliant.
  • Colors penetrate the surface and never wear off.
  • Will not grind off during resin-grinding stages of polished concrete.
  • Coordinate with Ameripolish® Edge Tint for a seamless wall-to-wall floor solution.
  • For indoor use only.
  • Coverage is approximately 400 - 700 sq ft. per gallon.

Our Price: $299.00
5 gal. Ameripolish® SureLock Concrete Dye | Xtreme Polishing Systems 5 gal. Ameripolish® SureLock Concrete Dye

Chemically Bonding Dyes for Polished Concrete

Ameripolish® SureLock Dye formula has recently been updated making them the most vibrant concrete dyes Ameripolish® has ever produced. SureLock Dyes are versatile colorants for polished concrete that mix with water or Ameripolish® ColorSolve™. SureLock Dyes are to be applied just before densifying with 3D HS or HSL, helping the color penetrate and chemically bond to the concrete.
Ameripolish® SureLock Dye is a pre-dissolved concentrate liquid that is fast and easy to use. The formula includes UV stabilizers to resist fading as well as a penetrating agent to eliminate further mixing and develop deep, rich colors even on hard, dense concrete.

Features & Benefits:
  • Mixes with water or Ameripolish® ColorSolve™ and is VOC compliant.
  • Consistent, rich penetrating color with UV stabilizers resist fading.
  • Optionally can be used with 3D line densifiers to chemically bond to the concrete.
  • Liquid concentrate eliminates 3-hour wait to dissolve dye required by other products.
  • For indoor use only.
  • Coverage is approximately 400 - 700 sq ft. per gallon.

Our Price: $299.00
5 gal. Ameripolish® 3D SP Stain Protector | Xtreme Polishing Systems 5 gal. Ameripolish® 3D SP Stain Protector

Stain Protector

Ameripolish® 3D SP is a breathable semi-penetrating/semi-tropical sealer that helps to protect surfaces against stains and etching. 3D SP creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion.

Features & Benefits:
  • Ready to use (RTU).
  • UV stabilizers help protect against fading.
  • Creates a water-resistant barrier to prevent staining, etching, and protect color.
  • 3D SP is a color enhancer for polish concrete floors with dye.
  • Contains 3D densifier properties to aid in hardening and dust-proofing.
  • Coverage is approximately 2,000 - 2,500 sq ft. per gallon.

Our Price: $300.00
5 gal. Ameripolish® ColorJuice Exterior Concrete Dye | Xtreme Polishing Systems 5 gal. Ameripolish® ColorJuice Exterior Concrete Dye

Ameripolish® ColorJuice Exterior Concrete Dye

Ameripolish® ColorJuice E concrete colorant is an improved formula of the old ColorJuice 3D and has an identical application process. This dye is a fast, easy way to apply color to some types of interior and many types of exterior concrete and provides durable, rich hues by bonding color pigment directly into the concrete.

Ameripolish® ColorJuice E is ideal for porous concrete finishes such as broom-finished or stamped concrete including pavements, porches, patios, driveways, sidewalks, and pool decks. ColorJuice E can also be used for interior concrete (at the appropriate grit stages) such as garage floors and can be applied to other cementitious surfaces.

Features & Benefits:
  • Low VOC.
  • Ideal for indoor or outdoor use.
  • Fast, easy application.
  • Water-based and UV stable.
  • Coverage rate: approx. 400 - 800 sq ft. per gallon.
  • Excellent performance when used with Ameripolish® X-Link WB Surface Sealer

Our Price: $350.00
5 gal. Ameripolish Oil Ingester Water-Based Microbial Stain Remover | Xtreme Polishing Systems 5 gal. Ameripolish® Oil Ingester

Water-Based Microbial Stain Remover

Ameripolish® Oil Ingester is an enzyme-based product that consumes and breaks down oil-based materials and absorbs odors from the surface of the concrete without causing damage or affecting any existing colorant, sealer, or stain protector. The biodegradable product is environmentally safe and can be left on surfaces for several days if needed to deeply penetrate seeped stains.

Features & Benefits:
  • Safely removes oil stains from most surfaces.
  • Stops oil from continually wicking to the surface
  • Does not damage colorants, sealers, or stain protectors
  • Works best above 55ºF and with regular applications

Our Price: $412.50
5 gal. ​Ameripolish® SR² Concrete Sealer & Stain Resistor | Xtreme Polishing Systems 5 gal. ​Ameripolish® SR² Concrete Sealer

Fully Penetrating Stain Resistor

Ameripolish® SR² is a penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil and water-based stains. The water and oil repelling qualities of SR² provide superior stain protection on most substrates.

Ameripolish® SR² can be used as a standalone product, but to obtain optimum performance, Ameripolish® SR² is recommended for use with Ameripolish® 3D HS or HSL Densifiers.

Features & Benefits:

  • Non-topical penetrating sealer.
  • Treated surfaces 'breath' and do not trap moisture.
  • Excellent stain repellency for residential, commercial, and even industrial applications.
  • Extreme hydrophobic and oil phobic characteristics for maximum stain resistance.
  • Coverage is approximately 3,000 - 5,000 sq ft. per gallon.

Our Price: $750.00
   
 
1

Construction, Contractor and DIY Supply

Xtreme Polishing Systems offers a wide range of decorative concrete, surface preparation and concrete polishing machines and supplies for all residential and commercial flooring needs. By guaranteeing a floor for life, Xtreme Polishing Systems specializes in turn-key, one-stop-shop products including floor grinding machines, floor polishing machines, diamond polishing pads, concrete densifiers, concrete sealers, epoxy resin coatings and protective urethane topcoats, concrete dyes, stains, and much more to assist you in completing a concrete floor from start to finish. We provide a full product line of do-it-yourself supplies, equipment and building materials for projects big and small. (Learn More)