Xtreme Polishing Systems | Surface Preparation Machines Equipment, Concrete & Epoxy Supply > Garage Floor Coatings >

Aliphatic Moisture Cured Urethane Topcoat
Aliphatic Moisture Cured Urethane Topcoat | Xtreme Polishing Systems


 
Product can only be shipped GROUND
Our Price: $450.00

Product Code: NPI-MCU5G
Qty:

Description Data Sheets Specifications
 
Aliphatic Moisture Cured Urethane Topcoat is a one-component moisture cured polyurethane (HDI based) floor coating/sealer that exhibits superior characteristics for abrasion resistance and chemical resistance. This product has good UV stability.
Features
  • 5 Gallon Kit
  • Solids by Weight: 65% (+/- 3%)
  • Solids by Volume: 60% (+/- 3%)
  • Volatile Organic Content: Less than 329 g/l COLOR: Clear (Hardener 1)
  • Recommended Film Thickness: 2-5 mils per coat wet thickness
  • Coverage Per Gallon: 320 to 800 square feet @ 2-5 mils wet thickness
  • Packaging Information: 1 gallon, 5 gallon and 55 gallon containers ( volumes approximate.)
  • Mix Ratio: One component product.
  • Shelf Life: 3 months in unopened containers.
  • Finish Characteristics: High gloss (70 at 60 degrees)
  • Abrasion Resistance: Taber abraser CS-17 calibrase wheel with 1000 gram total load and 500 cycles= 4.4 mg loss
  • Impact Resistance: Gardner Impact, direct & reverse= 100 in. lb. (passed)
  • Hardness: 2h
  • Flexibility: No cracks on a 1/8” mandrel
  • Adhesion: 360 psi @ elcometer (concrete failure, no delamination) (applied over NP154 clear primer) VISCOSITY: Less than 200 cps (typical)
  • DOT Classification: FLAMMABLE LIQUID N.O.S, 3, UN1993, PGIII

Share your knowledge of this product. Be the first to write a review »