Xtreme Polishing Systems | Surface Preparation Machines Equipment, Concrete & Epoxy Supply > Epoxy Resin Coatings >

New!  2 Gallons DRYTEK Moisture Vapor Barrier
2 Gallons DRYTEKâ„¢ Moisture Vapor Barrier for Concrete Surfaces by Xtreme Polishing Systems

Our Price: $389.53
Hazmat Freight $50.00

Availability: Usually Ships in 24 Hours
Product Code: 0906-0003-2

Description Data Sheets
DRYTEK™ Moisture Vapor Barrier is a single-coat system that is 100% solids, 2-part epoxy coating that is specifically designed for controlling the moisture vapor emission rate from new concrete or existing concrete slabs, prior to installing DRYTEK™ self-leveling underlayments and decorative toppings.
Features & Benefits
  • Low odor.
  • Easy to use.
  • Exceeds ASTM F3010 standard.
  • Available in 2 gallon and 6 gallon kits.
  • Fast curing abilities – as soon as 12 hours.
  • Component of the DRYTEK™ system warranty.
  • Can be applied over new concrete in as little as 5 days.
  • VOC content (mixed) <10g/L– UL GREENGUARD, Gold Certified.
  • DRYTEK™ Moisture Vapor Barrier is compatible with DRYTEK™ underlayments, most resinous coatings and non-water based adhesives for hardwood, vinyl, carpet and tile.
  • To be applied at minimum thickness of 12 mils. When applied at a minimum 12 mils thickness, it then exceeds ASTM F3010 and will control moisture vapor emission rate up to 25 lbs./1,000 ft2 /24 hr (1415 μg/(s • m))^ per ASTM F1869/ maximum^ RH conditions (per ASTM F2170).
  • In order to help insure accurate coverage, periodically check the mil thickness using a DRYTEK™ Moisture Vapor Barrier Wet Film Thickness Gauge.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Epoxy Resin Coatings
BY BRAND > Spartacote Laticrete