Ardex MC RAPID Moisture Control 22 LB Kit

One-Coat Moisture Control System for Concrete

Ardex MC RAPID Moisture Control is a one-coat, 100% solids epoxy moisture management system. Ardex MC subdues excessive moisture vapor fumes in new or existing concrete before installing an ARDEX underlayment with flooring or an ARDEX topping with sealer. MC Rapid is particularly suitable for treating new concrete areas with critical installations.

Some critical installations include health care and other institutional applications where the construction schedule does not allow adequate drying. Ardex MC RAPID Moisture Control is also recommended over existing concrete when the level of moisture vapor emissions from the slab exceeds the manufacturer's maximum allowable limit. Specially designed for quick installations, Ardex MC RAPID Moisture Control can receive an ARDEX underlayment or topping in as little as 4 hours.

Coverage Rates

Features and Benefits

• The one-coat epoxy resin system
• Ready to prime in just 4 hours
• For RH readings up to 100%
• Excellent coverage
• For underlayment applications of 1/4 inch (6 mm) or less, no sand broadcast is necessary.
• Reduce moisture vapor emissions to acceptable levels for floor coverings
• Solvent-free, alkali-resistant
• ASTM E96 0.06 perms
• Tenacious bond to the substrate

Applications

• Residential & Commercial Concrete Coating

Mixing Ratio: Add entire pre-measured contents of Part B (Hardener) into Part A (Resin).

Coverage:
10 mils (250 microns):
Approx. 250 – 270 sq. ft. (23 – 25 sq. m) per mixed unit of ARDEX MC RAPID
Approx. 150 – 165 sq. ft. per gallon (3.8 – 4 sq. m per liter)

14 mils (350 microns):
170 – 190 sq. ft. (16 – 18 sq. m) per mixed unit of ARDEX MC RAPID
Approx. 100 – 115 sq. ft. per gallon (2.5 – 2.8 sq. m per liter)
(Will vary with concrete surface profile, porosity and texture)

• Technical Data Sheet
• (Update on Epoxy Coatings/Terrazzo)
• (Update on Underlayments/Non-Porous Substrate)
• Safety Data Sheet (Part A)
• Safety Data Sheet (Part B)